53
Thermo Fisher Scientific
Operation Manual HM550
Setting the WAKE time
e
WAKE
time is used to trigger the instrument back into the active
state. It should be set with sufficient time before work is started (approx.
1,5 h).
• Press the menu button (fig. 42.9). is way, you get into the list of
submenus.
• Via the arrow buttons (fig. 41.5 and 41.6) select “Wake Time”. is
submenu is now shown inverted.
• Via the enter button (fig. 42.10) confirm this submenu and simultane-
ously open it.
• To change the WAKE time at intervals of 15 minutes, press the arrow
buttons (fig. 41.5 or 41.6).
• Confirm with enter (fig. 42.10).
Note:
You return immediately to the list of submenus. If the setting is not con-
firmed via the enter button, you will quit the submenu automatically after
five seconds and you return into the list of submenus. e current setting of
the submenu is also chosen and will still be valid.
• To quit the submenu, press the menu button (fig. 42.9).
• Now continue working with the selected settings.
After having reached the WAKE time, the instrument switches over to the
active status.
Figure 39.
Display: Adjust WAKE-Time.
Ver. 2.09
Operating instructions
Setting the real time, WAKE time, ACTIVE time and date
