48
Thermo Fisher Scientific
Operation Manual HM550
Note:
e letter “R”, however, might still be on. is function goes off only after
having passed from the return travel again to the cutting movements via the
hand wheel.
[8]
[9]
[10]
Figure 28.
Center keyboard, left buttons.
Figure 29.
Center keyboard, right buttons.
Further information on the cutting processes can be seen on the display.
Press the scroll/enter button (fig. 30.10), to show the various functions
one after the other.
Note:
Within the menu, the scroll/enter bu tton is used to confirm submenus and/
or settings. During operation, i.e. outside the menu, this button is used as a
scroll button.
e following information on the carried-out cutting processes of the
instrument can be read on the info line of the display:
– number of sections
– sum of section thicknesses
– remaining travel to the front end position
– real time
Indication of cutting
processes
[5]
[4]
[2]
[1]
[3]
[6]
Operating instructions
Indication of cutting processes
