Thermo Scientific AquaSensors™ DataStick™ Measurement System User Guide
10
The heart of the DataStick measurement system is a 1-inch tube body with encapsulated measurement electronics that automatically convert sensor
signals into calibrated engineering units. This single tube body in essence takes the place of a full family of analyzer electronics boxes. The DataStick
works seamlessly with a variety of communications adapters so that it can operate directly with any computer system. These features allow for quick
changes to the measurement system without significant down time.
Figure 2: The Universal Body
This family of plug and play communications adapters and sensor heads makes the DataStick the most versatile and accurate analytical
measurement system on the market. Any sensor type can be plugged in to obtain calibrated data. Any computer system can be set up to
communicate directly by configuring the DataStick system with the appropriate communications adapter. If local display and standard 4-20
milliamp data reporting is desired then the DataStick can be connected to Thermo Scientific AquaSensors AV38 Local display as shown in
the upper left corner of Figure 3. The AV38 can work with multiple DataSticks running the Modbus protocol.
Figure 3: Full Array of DataStick Options
DataStick system components can be exchanged in the field. Sensor heads will remain calibrated when moved from one DataStick
to another making it possible to perform calibrations in the laboratory and then just exchange sensor heads in the field. Systems are
shown here in stainless steel and PEEK
®
but are also offered in Ryton
®
and CPVC for a wide spectrum of applications.
1-inch NPT Threads
(Immersion)
Insert sensor head
this end.
1-inch NPT Threads
(Insertion)
Flat for sanitary adapters
Insert communications
adapter this end.
Wrench Flats
