Thermo Scientific AquaSensors™ DataStick™ Measurement System User Guide
17
3.2.3
Immersion Mounting
For immersion mounting applications the sensor is connected to a 1 inch to 1.5 inch reducing coupling. A 1.5 inch extension pipe is added
to protect the cable from damage.
Detailed Insertion Mount Installation Instructions
1.
Wiring:
a.
Route the sensor cable through the 1.5 inch extension pipe.
b.
Apply Teflon
®
tape to the sensor threads.
c.
Attach the sensor to the 1.0 inch NPT reducing coupling
by turning the sensor in a clockwise direction until secure.
d.
Route the cable to the junction box and use an extension cable.
e.
Connect the extension wires into the computer terminal block.
2.
Mount:
a.
Secure the pipe assembly so that the sensor is fully immersed
in the process. Handrail mounting hardware can be ordered from
Thermo Fisher Scientific.
