Thermo Scientific AquaSensors™ DataStick™ Measurement System User Guide
29
ASCII Commands to View Sensor units
Function
Command
Response
Explanation
View Sensor Units
GSUNITS
0
Data reported in pH units
1
Data reported in mV units
ASCII Commands to Set Sensor units
Function
Command
Explanation
Set to pH
SSUNITS 0
Sensor data will be reported in pH units
Set to mV
SSUNITS 1
Sensor data will be reported in mV units
All Set Commands will respond with “OK” if accepted and “ERROR” if not accepted
4 . 1 . 2 . 5
T E M P E R A T U R E U N I T S
Select TEMPERATURE UNITS from the Configuration pull-down menu to view or change units of measure.
Units shown in the temperature units window are active. To change units or to review options, scroll the selection list. Click on the
desired units of measure to place the new choice in the sensor units window. To accept the change, click OK. To abort the change,
click CANCEL.
Temperature can be displayed in °C or °F. Default units are °C.
ASCII Commands to View Temperature units
Command
Response
Explanation
GTUNITS
0
Data reported in °C
1
Data reported in °F
ASCII Commands to Set Temperature units
Command
Explanation
STUNITS 0
Sensor data will be reported in °C
STUNITS 1
Sensor data will be reported in °F
All Set Commands will respond with “OK” if accepted and “ERROR” if not accepted
