Thermo Scientific AquaSensors™ DataStick™ Measurement System User Guide
95
5
Diagnostics and Troubleshooting
5.1
Diagnostics
As long as the DataStick system is communicating with the host computer or PLC, a single command can be sent to obtain all operational
information. Through AquaComm™ the command is initiated through the DIAGNOSE pull down menu.
Select STATUS and all information will be detailed in the following report.
In this example specific information can link the specific DataStick to calibration and test information at the factory. Whenever there
are issues in the field, this information can make it much easier for Thermo Fisher Scientific to assist in troubleshooting.
In this example we know that the sensor type has been properly detected and that configuration and calibration memory are valid.
Most importantly, the run status of the DataStick is okay.
Refer to the Programming Guide for specific diagnostic commands and responses.
