Thermo Scientific LCQ Fleet, Getting Started Manual

Page: 32 / 74

3
Connecting the MALDI LTQ XL System
Connecting the MALDI Control Module to the MALDI LTQ XL System
18 LTQ Series Getting Connected Guide Thermo Scientific
The following figures show the cable connections between the MALDI control module and
the MALDI LTQ XL system:
• Figure 9 shows the four cable connections between the MALDI control module and the
left side of the MALDI sample module.
• Figure 10 shows the power line connection between the MALDI control module and the
power entry panel on the right side of the LTQ XL MS detector.
• Figure 11 shows the cable connection between the back side of the MALDI optics
module and the MALDI control module.
Figure 9. Connections between the left side of the MALDI LTQ XL system and the MALDI control module
Sensors
Motors
CCD Camera
Laser Power Laser Comm
V
acuum V
alve
Motors
Laser Comm
Sensors
Laser
Power
Aux.
DISCONNECT
WARNING
MODEL:MALDI Laser Control Module
SERIAL No:
CAUTION
Finnigan MAT
PASS
Ground Continuity
and HPOT Tests
Date:
By:
Power
Power In
From LTQ Accessory Outlet ONLY!
OFF ON
Vacuum Pump
MALDI LTQ XL system
(left-side panel)
MALDI control module
(rear panel)
Sensor
cable
Laser communications cable
Motors cable
Laser power
cable