manualshive.com logo in svg

Thermo Scientific LCQ Fleet, Getting Started Manual

Share
Download
Thermo Scientific LCQ Fleet Getting Started Manual Download Page 7

WEEE Compliance

This product is required to comply with the European Union’s Waste Electrical & Electronic 
Equipment (WEEE) Directive 2002/96/EC. It is marked with the following symbol:

Thermo Fisher Scientific has contracted with one or more recycling or disposal companies in each 
European Union (EU) Member State, and these companies should dispose of or recycle this product. 
See 

www.thermo.com/WEEERoHS

 for further information on Thermo Fisher Scientific’s compliance 

with these Directives and the recyclers in your country.

WEEE Konformität

Dieses Produkt muss die EU Waste Electrical & Electronic Equipment (WEEE) Richtlinie 2002/96/EC 
erfüllen.  Das Produkt ist durch folgendes Symbol gekennzeichnet:

Thermo Fisher Scientific hat Vereinbarungen mit Verwertungs-/Entsorgungsfirmen in allen EU-
Mitgliedsstaaten getroffen, damit dieses Produkt durch diese Firmen wiederverwertet oder entsorgt 
werden kann. Mehr Information über die Einhaltung dieser Anweisungen durch Thermo Fisher 
Scientific, über die Verwerter, und weitere Hinweise, die nützlich sind, um die Produkte zu 
identifizieren, die unter diese RoHS Anweisung fallen, finden sie unter  

www.thermo.com/

WEEERoHS

. 

Summary of Contents for LCQ Fleet











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands