Thermo Scientific ISQ, User Manual

Page: 90 / 152

5
Running a Sample
Running a Sequence
68 ISQ User Guide Thermo Scientific
10. Click the first row of the Injection Volume column and enter the amount of sample you
are injecting if you are using an autosampler. You can also right-click on the field to clear,
copy, or paste into the field, as well as add and delete rows.
Figure 54. Setting the Injection Volume
11. Click past the Level column, which is only used when you have a processing method.
Since you are in the process of developing your method, you do not have the processing
method defined yet.
12. Now that you’ve set up one row of your sequence, you can stop or you can continue
adding tasks. Click in the next row and repeat steps 2-10 for each additional task in your
sequence. Remember, you can right-click in most fields to add more rows as you go.
Note This field is not used by the AI/AS 3000 or AI/AS 1300, which use an injection
volume from the instrument method. The TriPlus and TriPlus RSH autosamplers
must be configured to read this value.