Thermo Scientific Dionex UltiMate 3000 Series, Operating Instructions Manual

Page: 11 / 270

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Operating Instructions Page 3
1.2 Safety Information
The CE Mark label and cTUVus Mark safety label on the instrument indicate that the
instrument is compliant with the related standards.
1.2.1 Symbols on the Module and in the Manual
The table shows the symbols used on the module:
Symbol Description
Alternating current—Courant alternatif
Power supply is on (-)—Le module est mis sous tension (-) and Power supply is
off (O)—Le module est mis hors tension (O)
Surface becomes hot during operation—La surface devient chaude lors du
fonctionnement.
Component susceptible to electrostatic discharge—Le composant est susceptible
de la décharge électrostatique
Refer to the Operating Instructions to prevent risk of harm to the operator and to
protect the module against damage.
Référez-vous à ce manuel pour éviter tout risque de blessure à l'opérateur et/ou
protéger le module contre tout dommage.
Label according to the "Measures for Administration of the Pollution Control of
Electronic Information Products" (China RoHS) guideline
Étiquette "Measures for Administration of the Pollution Control of Electronic
Information Products" (China RoHS)
WEEE (Waste Electrical and Electronic Equipment) label—For more
information, see the WEEE Information section in the "Installation and
Qualification Documents for Chromatography Instruments" binder.
Étiquette DEEE (Déchets d'Equipements Electriques et Electroniques) — Pour
plus d'informations, référez-vous au chapitre WEEE Information dans le classeur
"Installation and Qualification Documents for Chromatography Instruments".
At various points throughout the manual, the following symbols indicate messages of
particular importance:
Tip: Indicates general information, as well as information intended to
optimize the performance of the instrument.
Important: Indicates that failure to take note of the accompanying information
could cause wrong results or may result in damage to the module.
˜