Thermo Scientific APEX 100, User Manual, Page: 199 / 442

Thermo Scientific APEX User’s Guide
Page 199
3) Press the right-navigation button to highlight Sample A function (also called the
“Pack A” function).
Peak & Phase Angle – Pack A
4)
Press the Go button and a monitor screen with a flashing-hand/sample-A icon
appears.
Peak & Phase Angle – Pack A
5)
Place sample A on the conveyor, allow it to pass through the search head, and
manually catch it on the other side, or allow it to be rejected by your reject-1 device
(the default reject device for the Quality Test function).
Pass QA Test pack A to setup
Note: As you pass the contaminated test sample through the search head, the monitor
screen will update and show you the number of passes made (in this example = 1). In
addition, the average peak-signal value is also updated (in this example = 1150) as well
as the average phase-angle value (in this example = 65.00).
(continued…)