Thermo Scientific APEX 100, User Manual, Page: 181 / 442

Thermo Scientific APEX User’s Guide
Page 181
Setting Time or Distance Units
To set time or distance units for your reject-1 and/or reject-2 devices, do the following.
1)
Make sure the reject-settings menu is highlighted.
Reject Settings
2)
Press the Go button and the following menu appears.
Reject Settings
The top part of this menu is used to manage your reject-1 device and the bottom part to
manage your reject-2 device. The part on the right to is used (when enabled) to reject
all packages when calibrating your reject-1 device—as described in the following section.
In addition note that, currently, you and the detector are managing the durations of
both reject-devices (reject-1 and reject-2) using time units, as shown by the check mark
beside the clock icons.
3)
Highlight the reject-1 menu or the reject-2 menu—as appropriate to your situation.
(In the screen below, the reject-1 menu is highlighted.)
Reject 1 Duration – Time
(continued…)