Thermo Scientific 43iQ, Instruction Manual

Page: 99 / 284

Operation
Settings
Thermo Scientific 43iQ Instruction Manual 3-73
●
Lamp Voltage: Displays the current lamp voltage.
●
Lamp Intensity: Displays the current lamp intensity.
●
Down:
●
Manual Entry: Shows current value. If pressed, user can manually
set the detector gain value.
●
Auto Cal: When pressed, the detector’s auto-calibration process is
initiated. Please allow up to 5 minutes for calibration to complete.
User can stop calibration by pressing the Stop button under
Detector Gain.
●
End Cal: When pressed, the auto calibration is interrupted and the
value does not change.
●
Default Values: When pressed, the default gain for the lamp
intensity detector is restored.
Home Screen>Settings>Measurement Settings>Advanced Measurement
Settings>Optical Bench Settings>Continue To PMT Settings Screen
The PMT Settings screen contains the following information:
●
Across:
●
Description: Defines the actions the user can do.
●
PMT Supply: User can manually adjust the PMT supply value, read
target and calibration concentration, start/stop automatic
calibration, read voltage, frequency and zero offset frequency
values, and reset default values.
●
Current PMT: Displays the current PMT voltage value.
●
Units: Displays units for each item.