Alarm Codes
69
23*
Cooling Cycle Fault
Unit shut down to prevent damage, repair immediately.
X
24*
Heating Cycle Fault
Unit shut down to prevent damage, repair immediately.
X
25
Alternator Check
Check alternator charging rate, repair immediately.
X
X
26
Check Refrigeration Capacity
Monitor box temp, repair as required.
X
27
Unassigned
28
Pretrip or Self-check Abort
Pretrip or self-check was terminated, check for other alarms
and repeat.
X
29
Damper Circuit
Unit or zone may not defrost, monitor box temp, repair as
required.
X
30
Damper Stuck Closed
Damper is stuck closed, repair immediately.
X
31
Oil Pressure Switch
Oil pressure switch is not functioning.
X
Table of Alarm Codes
*Alarms with an asterisk (*) can exist with Alarm Code 84. The alarm can clear automatically if condition does not reoccur.
NOTE: Not all alarm codes are available with all microprocessor controllers or all revisions of software.
Code
Description
Corrective Action
Level Of
Action
Ok
T
o
Run
Ch
eck
S
hut
Dow
n
Alarm Codes
69
23*
Cooling Cycle Fault
Unit shut down to prevent damage, repair immediately.
X
24*
Heating Cycle Fault
Unit shut down to prevent damage, repair immediately.
X
25
Alternator Check
Check alternator charging rate, repair immediately.
X
X
26
Check Refrigeration Capacity
Monitor box temp, repair as required.
X
27
Unassigned
28
Pretrip or Self-check Abort
Pretrip or self-check was terminated, check for other alarms
and repeat.
X
29
Damper Circuit
Unit or zone may not defrost, monitor box temp, repair as
required.
X
30
Damper Stuck Closed
Damper is stuck closed, repair immediately.
X
31
Oil Pressure Switch
Oil pressure switch is not functioning.
X
Table of Alarm Codes
*Alarms with an asterisk (*) can exist with Alarm Code 84. The alarm can clear automatically if condition does not reoccur.
NOTE: Not all alarm codes are available with all microprocessor controllers or all revisions of software.
Code
Description
Corrective Action
Level Of
Action
Ok
T
o
Run
Ch
eck
S
hut
Dow
n
Summary of Contents for SB-200TG
