![background image](http://html.mh-extra.com/html/thermo-king/crr-40-119/crr-40-119_manual_1104388090.webp)
MP-3000a Controller
90
Configuration Menu
The Configuration menu displays a list of
functions that identifies unit operating features
and current settings. The following functions are
available: In-Range, Container ID, Contrast,
Language, Economy Max, Economy Min,
Humidity Option, Reefer Type, Zero Current,
Supply LH, Controlled Atmosphere Option,
Evaporator Fans, AFAM Setup, Auto
Configuration and Serial Number.
NOTE: When a spare parts controller is
installed and powered up for the first time, an
automatic configuration feature detects the unit
options installed on a unit. After the initial unit
power up, the controller turns the Auto
Configuration feature Off. See “Automatic
Configuration of Spare Parts Controller” in this
chapter for more information.
Viewing or Setting Functions
With the unit On/Off switch ON and the LCD
display showing the standard display (setpoint):
1. Press the F3 key to enter the Main Menu.
2.
Press F2 key to scroll through Main Menu until
“CONFIGURATIONS”
appears in LCD display.
3. Press F4 key to access the Configurations
screen. Configurations screen appears with
cursor in the Container ID menu line.
4. Press F3 key to scroll cursor to view or reset
the desired function:
•
Container ID: Sets the container
identification number. Enter up to 11
characters (numbers or letters).
•
In-Range: Sets the temperature value for
the controller’s In-range LED and
datalogger functions (factory default = 1.5
C [2.7 F]). Enter a value from 0.5 to 5.0 C
(0.9 to 8.9 F).
•
Contrast: Controller automatically
regulates black and white contrast value
on LCD display according to display
temperature. Standard setting is 45.
Resetting this value is not recommended.
•
Language: English is only setting
currently available.
Figure 21: Configuration Menu Screen Flow Diagram
Note: All screens are not present on
all units. The screens that display
on the controller are determined by
the Controller Software setting and
the options installed on the unit.
Main Menu
DATA
ALARMS
COMMANDS
MISC FUNCTIONS
CONFIGURATION
DATALOGGER
RMM STATE
Standard
IN RANGE
Configuration
Menu
CONT ID
CONTRAST
UNIT TYPE
Configuration
Submenu
• Current function setting
appears in display.
• Press F4 key to change a
setting.
• Press F2 key, A key
(password), F4 key and E
XIT
key.
• Type a new value; or press F3
key to toggle value to desired
setting.
• Press and hold F4 key until
cursor stops flashing.
REEFER TYPE
ZERO CURR
SUPPLY LH
AFAM OPT.
AUTO CONFIG.
EVAP. TYPE
COND. TYPE
AFAM UNITS
UNIT #
UNIT ID
CHART R
DEHUM. VALVE
G. ANALYZER
CARGO PROBES
Summary of Contents for CRR-40 119
