background image

 

Designed for installation inside casing of minisplit evaporator, 

above ceiling or inside lineset cover / Diseñada para instalarse 

dentro del gabinete del evaporador, encima de techo falso o en el 

cubierta de tuberÌa de cobre

 

Quick and easy to install / Rápido y fácil de instalar

 

Quietly and reliably pump condensate to a maximum

height of 33 feet / Bombean el aqua de condensacion hasta una 

altura máxima de 33 pies de manera silenciosa y confiables

mini aqua 

pump/bomba

INSTALLATION & MAINTENANCE MANUAL / MANUAL DE INSTALACION Y MANTENIMIENTO

Manufactured by: Aspen Pumps  Apex Way  Hailsham  East Sussex BN27 3WA  United Kingdom  
website: www.aspenpumps.com

Product Warranty 

The manufacturer disclaims all implied and express warranties, including the implied warranty of merchantability and the implied warranty of fitness for a particular purpose, 

except as follows: This condensate product purchased by you concurrently is unconditionally warranteed to be free from defects in material and workmanship under normal use for a period of two years 

from date of purchase, providing it is installed and operated strictly in accordance with the manufacturer’s installation instructions. If the product is found to be defect or otherwise fails in normal use, you 

may return it for replacement. All freight charges for the return of the product shall be borne by you. The manufacturer will pay outgoing freight charges for the replacement product. Defective product 

returned to the factory prepaid will be repaired or replaced free of charge. Replacement product will, to the extent such product is then available in the manufacturer’s inventory, be of a similar type of 

color and kind. Manufacturer retains the right to substitute product if the replacement product does not conform in terms of color, type and specifications to the original product if no longer available. 

This warranty does not cover replacement labor or any cost, claim or incident to any defect nor does it cover any consequential damages. The sole liability of the manufacturer under this warranty is 

limited to the replacement of defective product. Product damaged by improper use, accident, neglect, alteration, abuse or improper installation is excluded from this warranty.

Thank you for buying your new Mini Aqua Pump

 

This manual provides complete instructions for installation 

and maintenance which should be carefully followed. Please record following information for future reference: 

Agradecemos su compra de la nueva bomba Mini Aqua. 

 Éste manual proporciona las instrucciones completas 

que deben de seguirse cuidadosamente para la correcta instalación y mantenimiento de la bomba. Anote la 

información siguiente para una referencia futura.

Serial number: 

Operating voltage:

Numero de serie: 

Voltaje operativo:                

Date installed:    

Location of pump:   

Fecha de instalación: 

Ubicación de la bomba:

Imported and Distributed by: / Importado y distributado para:
2601 Spenwick Drive, Houston, TX 77055  Tel: 800-231-3345  Fax: 800-441-0051  www.rectorseal.com

Summary of Contents for mini aqua pump














Reviews: