![background image](http://html.mh-extra.com/html/thermo-king/crr-40-119/crr-40-119_manual_1104388167.webp)
167
Cool with Modulation Flow and Pressure Diagram
Flow and Pressure Diagram
CRR-40
Cool with Modulation (or Power Limit)
29. Evaporator Pressure Regulator (KVQ Valve)
Is a normally OPEN actuator valve. It CLOSES (or OPENS) accord-
ing to the strength and frequency of a pulsing voltage signal from the
controller. The voltage signal energizes a heating element in the
actuator power element. Increasing the temperature of the heating
element increases the pressure on the main valve actuator, forcing
the valve towards the closed position. Decreasing the temperature
of the heating element decreases the pressure on the main valve
actuator, drawing the valve towards the open position.
31. Liquid Injection Valve (LIV)
Is a normally CLOSED valve.
It OPENS when energized. When liquid injection is required, the
valve is pulsed open and closed on a 60 second duty cycle.
Liquid injection is controlled by the compressor discharge temperature
and the temperature control algorithm.
High pressure gas
High pressure liquid
Low pressure gas
Low pressure liquid
Condensing high pressure gas
Low pressure vaporizing liquid
Liquid refrigerant injection
Modulated pressure
Summary of Contents for CRR-40 119
