Switch ON the boiler with a long pushing of the button P2.
Display on the LCD when the boiler is ON:
1.
The Ignition is signalled by the word “
ignition
”
2.
The Work state is signalled by the word
“
run mode
”
3.
The
Modulation state is signalled by the word “
modulation
”
If the ignition is not succeed during the predefined time (time out) the controller will
turned OFF and the error message “Err12” will be displayed.
WARNING
•
An odour of the paint can be felt while the boiler fired up for the first time.
•
Do not open the combustion chamber door during operation.
•
Never fill the burner pot with pellets by hand. Excessive combustion material in the burner
pot means that the pellets will not be ignited optimally.
Switch OFF the boiler
Switch OFF the boiler with a long pushing of the button P2.
Words status when the boiler is switched OFF:
1.
The Extinguishing is signalled by
2.
The Extinguishing finished = OFF state is
signalled by
NOTICE
•
When the boiler is switched OFF the fan continues running until the flue gas
temperature falls below the set trash hold and then the fan is turned off.
Shutting the boiler down (end of season)
