Browsing Menu: Push P3 button to enter in the User Menu.
Using P4 and P6 buttons it is possible to select desired Menu or Submenu. Push P3
button to enter in the desired Menu or Submenu.
The Setting menu consists of the parameter names (first/second row), the minimum, the
maximum and the value (“Set”) current.
By pressing again button P3 you enter edit mode
(the “Set” field flashes); to decrease or increase value
, push the buttons P4 or P6; to save
the new value, push the button P3; to cancel the modified
and restore the old parameter’s
value push the button P1. If a parameter value is changed, the new value is sent to the
control board; if the transmission failure appears the message:
In that
case modify again the parameter’s value.
User Menu
To access the settings menu press P3. The menu is as follows:
MENU
DESCRIPTION
Combustion
Management
Functioning
Menu to change the combustion modality.
Pellet Power
Menu to modify the combustion power in Pellet modality.
Pellet Recipe
Menu to set the pellet combustion recipe.
Auger Calibration
Menu to modify the Auger's work time.
Fan Calibration
Menu to modify the Combustion Fan speed.
Heating
Management
Boiler Thermostat
Menu to modify the Boiler Thermostat value.
Buffer Thermostat
Menu to modify the Buffer Thermostat value.
DHW Thermostat
Menu to modify the Domestic Buffer Thermostat.
Flow Thermostat
Menu to modify the Flow Thermostat value.
Summer-Winter
Menu to select the Winter or Summer modality
Climatic Function
Menu to manage the climatic function.
Mixer Valve
Menu to manage the Mixer Valve.
Chrono
Menu to select the Chrono's program modality and
the timers of Ignition/Extinguishing of the boiler/stove
Transfer
not successful
