Getting Started
41
Operation and Reference
along with many others. A list of the most common parameters may be seen
in Appendix B.
Ordinarily, receiver parameters that have been changed will return to their
default status after a power cycle. However, the front panel display has a
function that allows you to save changed receiver settings so that they will
remain at their new values even after a power cycle. Perform the following
steps to save receiver settings:
1. If the front panel LED display is in sleep mode (nothing is displayed)
press any of the display control buttons.
2. From the main menu press the up arrow button (
G
) until the submenu
SETTINGS is visible on the Display.
3. Press the Enter button (
) to enter the SETTINGS submenu.
4. Press the up arrow button (
G
) to scroll until the function SAVE is seen on
the Display.
5. Press the Enter button (
) to initiate parameter saving. The message
"Save settings?" will be displayed.
6. Press the Enter button (
) to confirm the action.
7. Press the Cancel button (
K
) to return to the top level of the menu tree.
The user-changed parameters are now stored to memory and will not be lost
after a power cycle.
There are 3 ways to restore the parameters back to default values via the
front panel:
• Perform a parameter reset from the front panel display. The SETTINGS
submenu has an option called RESET TO FACTORY DEFAULTS. This
will reset all changed user parameters to default values.
• Perform a receiver initialization via the front panel display as described
in
Step7
-
Initialize the Receiver
(page
clear almanac and ephemeris information from memory and reformat
the SD card).
G3.book Page 41 Saturday, May 24, 2003 12:52 PM