manualshive.com logo in svg

Thales Z-Max, Operation And Application Manual

The Thales Z-Max Operation And Application Manual is readily available for download, completely free of charge, from our website. This comprehensive manual provides users with detailed instructions and guidance on operating and utilizing the product effectively. Simply visit manualshive.com to access and download the manual for your convenience.

Share
Download
background image

64

Z-Max Surveying System Operation and Applications Manual

The parameters available in this submenu are the following: 

  

Data Type and Port (TYPE: ****) 

This parameter displays and sets the RTK data type and port. To change this 
parameter, press the ENTER key and use the UP/DOWN control keys to 
choose the desired port and type. Press ENTER to select it. The possible 
settings are: 

OFF: RTK rover mode is off. 

AUTO: Will automatically detect CMR, CMR+, DBEN, or DSNP format on 

any port. 

RTCM A - RTCM D: RTCM format on port A, B, or D. 

  

RTK Positioning Algorithm (POSITIONING:) 

Displays and sets the RTK positioning algorithm. COARSE outputs Fast RTK 
positions. FINE outputs time-tagged RTK positions. The default is COARSE. 
To change the setting, press the ENTER key and use the control keys to 
select the desired algorithm.  

  

Log Raw Data  (LOGGING RAW DATA:) 

Display and sets raw data collection status. ON will log raw data (B, E, and S 
files) along with the epoch solution file (CBEN data) and the vector solution 
file (OBEN file). OFF will log the CBEN and the OBEN files only. The default 
is ON. To change this setting, press the ENTER key and use the control keys 
to select ON or OFF and press ENTER.  

  

RTK Logging Method  (LOG TYPE:) 

Displays and sets the method of RTK logging. The options are Auto Point 
(AUTO PT) and Trajectory (TRAJECT). Select AUTO PT if you wish to 
occupy points for a set period of time. Select TRAJECT if you are collecting 
data at set distance intervals. The default is AUTO PT. To change the setting, 
press the ENTER key. 

  

Time on point (TIME TO STAY: *** s) 

Visible only if LOG TYPE is set to AUTO PT. This parameter defines how long 
each point will be occupied in seconds. Valid interval is 0 - 999 seconds. The 
default is 10 seconds. To change this parameter, press the ENTER key.

  

Distance interval (DISTANCE INTERVAL: *.** m) 

Visible only if LOG TYPE is set to TRAJECT. This parameter sets the 
distance interval between point computation during a trajectory survey. Valid 

G3.book  Page 64  Saturday, May 24, 2003  12:52 PM

Summary of Contents for Z-Max



















































































































































































































































































































Reviews:

No comments

Related manuals for Z-Max

Racelogic MFD Touch Quick Start Manual preview
MFD Touch
Brand: Racelogic Pages: 2
TRACKIMO TRKM002/010 Operating Instructions Manual preview
TRKM002/010
Brand: TRACKIMO Pages: 123
Step-Hear STEPHEAR User Manual preview
STEPHEAR
Brand: Step-Hear Pages: 6
Queclink GV300CAN User Manual preview
GV300CAN
Brand: Queclink Pages: 24
Garmin ECHOMAP UHD2 6 SV Installation Instructions Manual preview
ECHOMAP UHD2 6 SV
Brand: Garmin Pages: 14
B&G Vulcan Series Instruction Manual preview
Vulcan Series
Brand: B&G Pages: 68
Tele System TS 8500 PND Quick Start Manual preview
TS 8500 PND
Brand: Tele System Pages: 56
GalileoSky v 5.0 User Manual preview
v 5.0
Brand: GalileoSky Pages: 10
Startrack VT900 User Manual preview
VT900
Brand: Startrack Pages: 3
Garmin GDL 39 User Manual preview
GDL 39
Brand: Garmin Pages: 60
Garmin GARMIN DRIVESMART 76 Owner'S Manual preview
GARMIN DRIVESMART 76
Brand: Garmin Pages: 64
Garmin GMI 10 Digital Marine Instrument Display Product Information preview
GMI 10 Digital Marine Instrument Display
Brand: Garmin Pages: 48
Qstarz BT-Q818 Quick Installation Manual preview
BT-Q818
Brand: Qstarz Pages: 2
Qstarz CR-Q1100P Quick Start Manual preview
CR-Q1100P
Brand: Qstarz Pages: 4
Qstarz BT-Q1200 Super 99 Quick Installation Manual preview
BT-Q1200 Super 99
Brand: Qstarz Pages: 7
Qstarz BT-Q800 User Manual preview
BT-Q800
Brand: Qstarz Pages: 20
Qstarz BT-Q890 User Manual preview
BT-Q890
Brand: Qstarz Pages: 24
Qstarz BT-Q1000XT User Manual preview
BT-Q1000XT
Brand: Qstarz Pages: 36

Brands by name

Popular brands

Load more brands