manualshive.com logo in svg

Thales Z-Max, Operation And Application Manual

Share
Download
Thales Z-Max Operation And Application Manual Download Page 130

System Components

107

System Guide to Post-process GPS Surveying

Adapter connects to the top of the GPS Receiver Module in the same receptacle 
where the GPS Antenna Module connects during a static survey (Figure 2.7).  

Pole Adapter 

The Pole Adapter is used when the Z-Max System is functioning as a kinematic 
post-processed rover. The Pole Adapter is used to raise the GPS Antenna 
Module high enough on the survey pole so that the antenna’s view to the satellites 
is not blocked by the user. The Pole Adapter connects between the GPS Antenna 
Module and the GPS Receiver Module when using a pole-mounted system, or 
between the GPS Antenna Module and the Range Pole RF Adapter (see below) 
when using a backpack-mounted system (Figure 2.8). The pole adapter is the 
same size and shape as the UHF antenna.

 Figure 2.7 

Max-RF Adapter

G3.book  Page 107  Saturday, May 24, 2003  12:52 PM

Summary of Contents for Z-Max



















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands