manualshive.com logo in svg

Thales Z-Max, Operation And Application Manual

Share
Download
Thales Z-Max Operation And Application Manual Download Page 144

Connecting System Hardware

121

System Guide to Post-process Surveying

3. Mount the Z-Max assembly in the backpack with the GPS Antenna 

Module pointing up. 

4. Attach the handheld computer (if applicable) to SERIAL A on the GPS 

Receiver Module using the data collector cable. 

  

Before connecting the cables from the backpack to the pole assembly, put on the 
backpack. The last step is to connect the cable(s) to the connectors on the pole 
assembly. The completed backpack-mounted system for collecting post-processed 
data is shown in Figure 3.8. The handheld computer, if used, can be carried or 
attached to the survey pole.    

 Figure 3.7  

Z-Max Backpack Connectivity

G3.book  Page 121  Saturday, May 24, 2003  12:52 PM

Summary of Contents for Z-Max



















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands