manualshive.com logo in svg

Thales Z-Max, Operation And Application Manual

The Thales Z-Max Operation And Application Manual is readily available for download, completely free of charge, from our website. This comprehensive manual provides users with detailed instructions and guidance on operating and utilizing the product effectively. Simply visit manualshive.com to access and download the manual for your convenience.

Share
Download
background image

56

Z-Max Surveying System Operation and Applications Manual

There are many parameters used to configure the RTK Rover. To improve useability, 
the RTK Rover menu tree has been broken up into three levels. 

Level 1

 sets the  

antenna parameters, 

level 2

 selects between manual or auto/trajectory data logging, 

and 

level 3

 accesses the parameters particular to the selection made in level 2. Some 

of the parameters in 

level 3

 are mode-dependent, meaning that the parameters 

displayed will depend upon the parameters that were selected in the Survey 
Configuration (SURVCONF) menu. 

Each level will be described separately. 

1st Level

The top level parameters displayed are the following: 

  

Antenna Height  (ANT HT: **.**** m) 

Displays and sets the height of the antenna above the survey mark in meters. 
Valid range is from 0.00-64.0000 meters. To change this parameter, press the 
ENTER key. The default is 0.0 meters. 

  

Antenna Radius  (ANT RAD: *.**** m) 

Displays and sets the radius of the antenna in meters. Valid range is from 
0.00-9.9999 meters. To change this parameter, press the ENTER key. 

  

Entry to Logging submenu  (LOGGING) 

Entry point to the second level of submenus. Press the ENTER key to reach 
the 2nd level submenu.  

 2nd Level

The 2nd level submenu allows you to select between MANUAL and AUTO POINT if 
the Auto Point option was selected as the LOG TYPE in the SURVCONF menu, or 
between MANUAL and TRAJECTORY if the Trajectory option was selected as the 
LOG TYPE in the SURVCONF menu. Selecting one of these options in the 2nd level 
will take you automatically to the 3rd level. To enter the third level, use the UP/DOWN 
control keys to select the desired RTK logging type and press ENTER. This selection 
will take you to the 3rd level. 

  

Manual Logging  (MANUAL POINT) 

Entry point to the submenus to set manual logging parameters and to execute 
a Manual Point RTK survey. In a Manual Point survey, the user sets the site 
name and monitors the elapsed time to determine when to end the site 
occupation. To enter this level, press the ENTER key. 

  

Automatic Logging  (AUTO POINT) 

Entry point to the submenus to set automatic logging parameters and to 
execute an AUTO POINT RTK survey. In an AUTO POINT survey, the user 

G3.book  Page 56  Saturday, May 24, 2003  12:52 PM

Summary of Contents for Z-Max



















































































































































































































































































































Reviews:

No comments

Related manuals for Z-Max

Haicom HI-405BT User Manual preview
HI-405BT
Brand: Haicom Pages: 32
Vjoy Car Tracking Smart ET005 User Manual preview
Tracking Smart ET005
Brand: Vjoy Car Pages: 14
TopflyTech T8808+ User Manual preview
T8808+
Brand: TopflyTech Pages: 16
Altina GPS GBT 709 User Manual preview
GPS GBT 709
Brand: Altina Pages: 15
PAJ GPS VEHICLE FINDER 2.0 User Manual preview
VEHICLE FINDER 2.0
Brand: PAJ GPS Pages: 38
Motorola MOTONAV TN500 Series Installation Manual preview
MOTONAV TN500 Series
Brand: Motorola Pages: 22
Garmin GPS 15H Reference Manual preview
GPS 15H
Brand: Garmin Pages: 1
Navitel E200 TMC User Manual preview
E200 TMC
Brand: Navitel Pages: 24
Koden MDP-621 Operation Manual preview
MDP-621
Brand: Koden Pages: 244
THOMSON GPS 280 Owner'S Manual preview
GPS 280
Brand: THOMSON Pages: 109
BLOO LOC yB-010050-WT User Manual preview
yB-010050-WT
Brand: BLOO LOC Pages: 7
LXNAV E500 Installation Manual preview
E500
Brand: LXNAV Pages: 8
RUPTELA ECO3 User Manual preview
ECO3
Brand: RUPTELA Pages: 67
Mictrack B21 User Manual preview
B21
Brand: Mictrack Pages: 9
EMTAC S3 BTGPS User Manual preview
S3 BTGPS
Brand: EMTAC Pages: 27
TomTom 9821 User Manual preview
9821
Brand: TomTom Pages: 11
Fimto TK109 User Manual preview
TK109
Brand: Fimto Pages: 16
Telic Picotrack Endurance Primary User Manual preview
Picotrack Endurance Primary
Brand: Telic Pages: 27

Brands by name

Popular brands

Load more brands