Mistblowers Notice of Instructions
Page
36
of
43
6.5.6.
Sonar MCK Electrical Distributor
6.5.6.1.
Control Basics
A
General ON-OFF key with green led.
B
Left “AUTO/HAND OPERATED” key with green led
C
“VOLTAGE FEEDING” green led
D
Left “START/STOP” key with red led
E
General “START/STOP” key with red led
F
“SELECT / RESET”key for display and reset indications.
G
General “AUTO/HAND-OPERATED” key with green led
H
“PROG” key for constant programming
I
Right “START/STOP” key with red led
L
“–” key to diminish values in programming phase.
M “+” key to increase values in programming phase
N
Right “AUTO/HAND-OPERATED” key with green led
O
5 numbers back-lit LCD display with green leds to view
6.5.6.2.
Pressure Adjustment
1.
Switch on the control, tapping the ON button (A position).
2.
If needed set the control on hand-operating mode (tap B and N buttons, switching off thus the green leds).
3.
Close the electrovalves of the sectors (tap D and I buttons, it it is convenient, switching on the red colour leds).
4.
Connect the PTO and make it spin to the planned working revolutions.
5.
Open the electrovalves of the sectors (tap D and I switching off the colour red leds).
6.
Turn the pressure knob of the distributor to the wanted pressure, Clockwise turn stands for increasing pressure,
counterclockwise for diminishing pressure.
Summary of Contents for ASM1-200-24
