Teyme ASM1-200-24, Instructions Manual

Page: 24 / 46

Mistblowers Notice of Instructions
Page 23 of 43
Colour Symbol Activation Mouvement
+
Up
- Down
+ Up
-
Down
+ Up
-
Down
Green Left Activator
Blue Right Activator
Red
Central activator or
electrovalves block
After activating the hydraulic systems and having filled up the system with oil, check the hydraulic oil level of the tractor
and fill it up if necessary.
5.4. Electrical Plugs
5.4.1. Basics
If the machine includes some electrical components, some details will have to be born in mind to carry out correctly the
connection and avoid problems during the work.
The voltage which the electrical components require is 12 V. Before connecting any of them, make sure that the polarity is
the correct one.
Red Wire = 12V (+ positive) Cable Black = (- negative)
The connectors assembled in the electrical components follow the standards of the big majority of the most modern
tractors. If you have a tractor with another sort of power connector it will be necessary to disassemble the current
connector and adapt it to the tractor’s one.
All the electrical machines which are to be assembled will have protection fuses set up.
5.4.2. Lighting and Signs (In Option)
Connect correctly the plug of 7 poles of the trailer to the pin of the tractor. The electrical circuit is protected against
overintensities with a fuse included in the plug. Check that the fuse is in good condition.
The supports of the rear lights will have to remain perpendicular to the marching sense when the machine moves through
the public roads, whether urban or interurban.
5.4.3. Water Distributor
Search a place in the tractor’s cab where it could be possible to adapt the control box to handle it in the most comfortable
way. The most suitable place is at the right side of the seat of the driver.
The control box must be well attached to avoid any blow or excessive vibrations. The box includes self-rechargeable
fuses.