Teyme ASM1-200-24, Instructions Manual

Page: 40 / 46

Mistblowers Notice of Instructions
Page 39 of 43
7.2. PTO Axle and PTO Shaft
Grease the knots of the PTO shafts (internal/external) every 8 working hours; the points of turning of the protector and
the fixation of the PTO shaft will have to be greased every 40 hours. For a better gliding, it is necessary to grease the PTO
shaft tubes every 16 hours.
Replace the protections if they are damaged or broken.
7.3. Water Pumps
7.3.1. Ordinary Maintenance
MAINTENANCE PERIOD INTERVENTION
Every time it is used •
Level and oil status control
•
Suction Filter’s Control and eventual Cleaning
Every 50 hours •
Control of inflating pressure of the accumulator
•
Control of the fixation of the pump to the structure that holds it
7.3.2. Extraordinary Maintenance
MAINTENANCE PERIOD INTERVENTION
The first 50 hours (piston
pumps)
The first 300 hours (diaphragm
pumps)
Carry out the change of oil
Every 300 hours
•
Check that the pumps’ screws are tight.
•
Check that the pressure limiting valve and the safety valve works.
•
Check that the valves of suction and delivery work.
•
Check status of o’rings joints in piston pumps and replace them if
needed
Every end of the season or once a
year •
Change of oil
•
Check and eventually replace diaphragms
•
Check and eventually replace joints in piston pumps.
7.4. Gear Box Unit
Check the oil level by means of the A viewer; the first oil change must be done after 100/150 hours and successive ones
every 250/300 working hours.
Use for this purpose SAE-20/40 HD oil emptying it with the B cap and filling it with the C cap.