CESSNA®
MODEL 525B
MAINTENANCE MANUAL
(18) When the MAG swing procedure is complete, make sure that the progress bar goes off and a
“Verifying” message is shown at the top of the screen as shown in Figure 506 followed by a
“Swing Ok” message as shown in Figure 507.
NOTE:
If the "Field Var” is more than 5mG, the message “Failed” is shown at the top of the
screen. If this occurs, start the swing again.
(19) After the “Swing OK” message is shown, push the Menu button to exit the MAG Swing screen
and select “Save Changes” to return to Maintenance Mode.
(a)
Wait 15 seconds to let the EFD-750 save the changes.
(20) Taxi the airplane back to the maintenance facility and stop the engines. Refer to the Model 525B
FAA Approved Airplane Flight Manual for the taxi and engine shutdown instructions.
(21) Set the STBY DISPLAY switch to the OFF position.
(22) Set the BATTERY switch to the OFF position.
34-18-00
Page 513
© TEXTRON AVIATION INC.
Feb 23/2022
ICA-525B-34-00004
Form 2261 Rev 1
