95
Pressing
Set to Minimum
sets the
Holdoff time to the minimum, 4ns.
Note
Note: The holdoff function is automatically
disabled when the waveform update mode is in
roll mode (page65).
3-7-4. Setup Trigger Mode
Background
The trigger mode can be set to Normal or Auto
(untriggered roll). The triggering mode applies to
all the trigger types. See page 65.
Panel Operation 1. Press the Trigger menu key.
Menu
2. Press
Mode
from the bottom menu
to change the triggering mode.
3. Use the side panel to select
Auto
or
Normal
triggering modes.
Range
Auto, Normal
3-7-5. Using the Edge Trigger
Panel Operation 1. Press the trigger
Menu
key.
Menu
2. Press
Type
from the lower bezel
menu.
3. Select
Edge
from the side menu.
The edge trigger indicator appears
at the bottom of the display.
From left: trigger source, slope, trigger level,
coupling
4. Press
Source
to change the trigger
source.
5. Use the side menu to select the trigger source
type.
Range
Channel 1 ~ 4 (Alternate On/Off),
EXT (Ext Probe: Volt/Current,
Attenuation: 1mX~1kX, CH2 models
only), AC Line
6. Press
Coupling
from the bottom
bezel menu to select the trigger
coupling or frequency filter
settings.
