152
7. HARDCOPY
The Hardcopy key is used as quick-save or quick-print key. The
Hardcopy key can be assigned either to printout screenshots or to
save files.
When assigned to “Print” the screen image can be printed to a
PictBridge compatible printer using the USB device port. To reduce
the amount of printer ink used for each print, images can be printed
using the Ink Saver function.
When assigned to “Save”, pressing the Hardcopy key can be used
to save a screen shot, a waveform, or the current setup, depending
on the configuration.
7-1-1. Printer I/O Configuration
Panel Operation 1. Connect a PictBridge printer to the USB device
port on the rear panel.
LINE VOLTAGE
AC 100 240V
RANGE
FREQUENCY
50 60Hz
POWER MAX.
30 Watts
CAUTION
TO AVOID ELECTRIC SHOCK THE POWER CORD PROTECTIVE GROUNDING
DO NOT REMOVE COVERS. REFER SERVICING TO QUALIFIED PERSONNEL.
CONDUCTOR MUST BE CONNECTED TO GROUND.
Ser. No. Label
2. Press the
Utility
key.
Utility
3. Press
I/O
from the bottom menu.
4. Press USB
Device Port
from the
side menu and select
Printer
.
7-1-2. Print Output
Ensure the USB port has been configured for the printer and the
printer is connected to the scope before trying to print.
Panel Operation 1. Press the
Utility
key.
Utility
2. Press
Hardcopy
from the bottom
menu.
3. On the side menu, press
Function
and select
.
4. Press the
Hardcopy
key to print.
The display image is printed out.
Hardcopy
