109
2. Press
Identifier
from the side menu
to set the identifier data.
To edit the identifier, use the
Variable
knob to highlight a binary
or hex digit and press
Select
. Use
the
Variable
knob to choose a
value for the digit and press
Select
to confirm.
VARIABLE
Binary
0,1,X (don’t care)
Hex
0~F, X (don’t care)
Trigger On -
Data
If
Data/Id and Data
was configured for the
Trigger On setting, then the triggering data
must be configured.
1. Press
Data
on the bottom menu.
2. Press
Number of Bytes
from the
side menu and choose the number
of bytes for the data.
Bytes
1~8 Bytes
3. Press
Data
from the side menu to
edit the triggering data.
To edit the data, use the
Variable
knob to highlight a binary or hex
digit and press
Select
. Use the
Variable
knob to choose a value for
the digit and press
Select
to
confirm.
VARIABLE
Binary
0,1,X (don’t care)
Hex
0~F, X (don’t care)
4. Press
Trigger When
from the side
menu to choose the triggering
condition for the data.
When
=,
≠, <, >, ≤, ≥
5. The bus will now trigger when the specified data
matches the
Trigger When
conditions.
3-7-13. Bus Trigger Mode
Trigger Mode
1. Like the other trigger configurations, the Bus
Trigger mode can be set to Auto (Untriggered
Roll) and Normal.
