106
Trigger On
–
Data
If MOSI, MISO or MISO/MOSI was configured
for the Trigger On setting, then the number of
words and the data can be configured.
1. Press
Data
from the bottom menu.
2. Press
Number of Words
from the
side menu and choose the number
of words for the data.
SPI
1~32 Words
3. Press
MOSI or MISO
from the side
menu to edit the triggering data.
To edit the data, use the
Variable
knob to highlight a binary or hex
digit and press
Select
. Use the
Variable
knob to choose a value for
the digit and press
Select
to
confirm.
VARIABLE
Binary
0,1,X (don’t care)
Hex
0~F, X (don’t care)
3-7-12-4. CAN Bus Trigger
The CAN bus trigger conditions can be set at any time after the bus
setting has been set to CAN.
Panel Operation 1. Set the Bus to CAN in the bus
menu.
Page 80
2. Press the
Trigger Menu
key.
Menu
3. Press
Type
from the bottom menu.
4. Select
Others
→
Bus
from
the side menu. The Bus
indicator appears at the
bottom of the display.
The Trigger on settings will be reflected on the
Trigger Configuration icon.
From left: Bus trigger, Trigger source
5. Press
Trigger On
and select the
triggering condition for the selected
bus.
