manualshive.com logo in svg

Texas Instruments TMS320C6 Series, User Manual

Share
Download
Texas Instruments TMS320C6 Series User Manual Download Page 98

Closing a Window

 

3-32

3.7

Closing a Window

The debugger opens various windows on the display according to the debug-
ging mode you select. When you switch modes, the debugger may close some
windows and open others. Additionally, you can choose to open DISP,
WATCH, and MEMORY windows.

Most of the windows remain open—you can’t close them. However, you can
close the CALLS, DISP, WATCH, and MEMORY windows. To close one of
these windows:

1) Make the appropriate window active.

2) Press 

F4

.

You can also close a WATCH window by using the WR command:

wr

[

window name]

When you close a window, the debugger remembers the window’s size and
position. The next time you open the window, it will have the same size and
position. That is, if you close the CALLS window and reopen it, it will have the
same size and position it did before you closed it. When you open a DISP,
WATCH, or MEMORY window, it will occupy the same position as the last one
of that type that you closed.

Summary of Contents for TMS320C6 Series

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands