manualshive.com logo in svg

Texas Instruments TMS320C6 Series, User Manual

Share
Download
Texas Instruments TMS320C6 Series User Manual Download Page 193

Defining Areas for Profiling

10-11

Profiling Code Execution

Unmarking an area

If you want to stop collecting information about a specific area, unmark it. You
can use the mouse or key method.

Unmarking a line area:

1) Point to the marked line.

2) Click the right mouse button once.

The line will no longer be highlighted.

Unmarking a range area:

1) Point to the marked line.

2) Click the right mouse button once.

The line will no longer be highlighted.

Unmarking a function area:

1) Point to the marked statement that declares the function.

2) Click the right mouse button once.

The line will no longer be highlighted.

Summary of Contents for TMS320C6 Series

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands