Texas Instruments TMS320C6 Series User Manual Download Page 93

Page: 93 / 304

Manipulating a Window

3-27

The Debugger Display

Moving a window

The windows in the debugger display don’t have fixed positions—you can
move them around.

There are two ways to move a window:

By using the mouse

By using the MOVE command

1) Point to the left or top edge of the window.

COMMAND

>>>

load sample

Loading sample.out

go main

Point to the top edge
or the left edge

2) Press the left mouse button but don’t release it; now move the mouse in

any direction.

3) Release the mouse button when the window is in the desired position.

move

The MOVE command allows you to move the active window. The format of this
command is:

move

[

X position, Y position [, width, length ] ]

You can use the MOVE command in one of two ways:

Method 1

Supply a specific

X position and Y position.

Method 2

Omit the

X position and Y position parameters and use arrow

keys to interactively resize the window.

Summary of Contents for TMS320C6 Series

















































































































































































































































































































Search results

Summary of Contents for TMS320C6 Series

Reviews:

Brands by name

Popular brands

Texas Instruments TMS320C6 Series, User Manual

Search results

Summary of Contents for TMS320C6 Series

Reviews:

Brands by name

Popular brands