manualshive.com logo in svg

Texas Instruments TMS320C6 Series, User Manual

Share
Download
Texas Instruments TMS320C6 Series User Manual Download Page 182

Changing the Prompt

 

9-12

9.4

Changing the Prompt

prompt The debugger enables you to change the command-line prompt by using the

PROMPT command. The format of this command is:

prompt

new prompt

The 

new prompt can be any string of characters, excluding semicolons and

commas. If you type a semicolon or a comma, it terminates the prompt string.

Note that the SSAVE command doesn’t save the command-line prompt as part
of a custom configuration. The SCONFIG command doesn’t change the
command-line prompt. If you change the prompt, it stays changed until you
change it again, even if you use SCONFIG to load a different screen configura-
tion.

If you always want to use a different prompt, you can add a PROMPT com-
mand to the init.cmd batch file that the debugger executes at invocation time.

You can also execute this command as the Prompt selection on the Color
pulldown menu.

Summary of Contents for TMS320C6 Series

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands