manualshive.com logo in svg

Texas Instruments TMS320C6 Series, User Manual

Share
Download
Texas Instruments TMS320C6 Series User Manual Download Page 206

Functional Summary of Debugger Commands

 

11-2

11.1 Functional Summary of Debugger Commands

This section summarizes the debugger commands according to these catego-
ries:

-

Changing modes. These commands (listed on page 11-3) enable you
to switch freely between the debugging modes (auto, mixed, minimal, and
assembly).

-

Managing windows. These commands (listed on page 11-3) enable you
to select the active window and move or resize the active window.

-

Displaying and changing data. These commands (listed on page 11-3)
enable you to display and evaluate a variety of data items.

-

Performing system tasks. These commands (listed on page 11-4)
enable you to perform several DOS-like functions and provide you with
some control over the target system.

-

Managing breakpoints. These commands (listed on page 11-4) provide
you with a command line method for controlling software breakpoints.

-

Displaying files and loading programs. These commands (listed on
page 11-5) enable you to change the displays in the FILE and
DISASSEMBLY windows and to load object files into memory.

-

Customizing the screen. These commands (listed on page 11-5) allow
you to customize the debugger display, then save and later reuse the
customized displays.

-

Memory mapping. These commands (listed on page 11-5) enable you
to define the areas of target memory that the debugger can access.

-

Running programs. These commands (listed on page 11-6) provide
you with a variety of methods for running your programs in the debugger
environment.

-

Profiling commands. These commands (listed on page 11-7) enable
you to collect execution statistics for your code.

Summary of Contents for TMS320C6 Series

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands