manualshive.com logo in svg

Texas Instruments TMS320C6 Series, User Manual

Share
Download
Texas Instruments TMS320C6 Series User Manual Download Page 188

Defining Areas for Profiling

 

10-6

Marking a line. These instructions apply to both C and disassembly.

4) Point to the line you want to mark.

5) Click the left mouse button.

The beginning of the line will be highlighted with >>.

6) Click the left mouse button again.

The beginning of the line will be highlighted with Le> (line enabled).

Marking a range. These instructions apply to both C and disassembly.

1) Point to the first line of the range you want to mark.

2) Click the left mouse button.

The beginning of the line will be highlighted with >>.

3) Point to the last line of the range.

4) Click the left mouse button again.

The beginning of the line will be highlighted with Re> (range enabled),
marking the beginning of the range. The last line will be highlighted with

<<

, marking the end of the range.

Marking a function. These instructions apply to C only.

1) Point to the statement that declares the function you want to mark.

2) Click the left mouse button.

The beginning of the line will be highlighted with Fe> (function enabled).

Summary of Contents for TMS320C6 Series

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands