manualshive.com logo in svg

Texas Instruments TMS320C6 Series, User Manual

Share
Download
Texas Instruments TMS320C6 Series User Manual Download Page 4

How to Use This Manual

iv

 

-

Part III: Reference Material provides supplementary information.

J

Chapter 11 gives a complete summary of all the tasks introduced in
Parts I and II. This includes a functional and an alphabetical summary
of the debugger commands and a topical summary of function key ac-
tions.

J

Chapter 12 provides information about C expressions. The debugger
commands are powerful because they accept C expressions as
parameters; however, you can also use the debugger to debug as-
sembly language programs. The information about C expressions
aids assembly language programmers who are unfamiliar with C.

J

Part III also includes a glossary and an index.

The way you use this book depends on your experience with similar products.
As with any book, it would be best for you to begin on page 1 and read to the
end. Because most people don’t read technical manuals from cover to cover,
here are some suggestions for choosing what to read.

-

If you have used TI development tools or other debuggers before, you may
want to:

J

Read the introductory material in Chapter 1.

J

Complete the tutorial in Chapter 2.

J

Read the alphabetical command reference in Chapter 11.

-

If this is the first time that you have used a debugger or similar tool, you
may want to:

J

Read the introductory material in Chapter 1.

J

Complete the tutorial in Chapter 2.

J

Read all of the chapters in Part II.

Summary of Contents for TMS320C6 Series

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands