Texas Instruments TMS320C6 Series, User Manual

Page: 256 / 304

Summary of Special Keys
11-52
Running code
To do this
Use these
function keys
Run code from the current PC (equivalent to the RUN command
F5
without an expression parameter)
Single-step code from the current PC (equivalent to the STEP
F8
command without an expression parameter)
Single-step code from the current PC; step over function calls
F10
(equivalent to the NEXT command without an expression
parameter)
Selecting or closing a window
To do this
Use these
function keys
Select the active window (pressing this key makes each window
F6
active in turn; stop pressing the key when the desired window
becomes active)
Close the CALLS, WATCH, DISP, or additional MEMORY window
F4
(the window must be active before you can close it)
Moving or sizing a window
You can use the arrow keys to interactively move a window after entering the
MOVE or SIZE command without parameters.
To do this
Use these
function keys
Move the window down one line
↓
Make the window one line longer
Move the window up one line ↑
Make the window one line shorter
Move the window left one character position
←
Make the window one character narrower
Move the window right one character position
→
Make the window one character wider