’C209 On-Chip Peripherals
11-17
TMS320C209
Figure 11–5.’C209 Wait-State Generator Control Register (WSGR) — I/O Address FFFFh
15–4
3
2
1
0
ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ
Reserved
AVIS
ISWS
DSWS
PSWS
0
W–1
W–1
W–1
W–1
Note:
0 = Always read as zeros; W = Write access; value following dash (–) is value after reset.
Bits 15–4
Reserved. Bits 15–4 are reserved and are always read as 0s.
Bit 3
AVIS — Address visibility mode. AVIS = 1 enables the address visibility mode of
the device. In this mode, the device provides a method of tracing internal code opera-
tion: it passes the internal program address to the address bus when this bus is not
used for an external access. At reset, AVIS is set to 1. For production systems, the
AVIS bit should be cleared to 0 to reduce power and noise. (AVIS does not generate
a wait state.)
Bit 2
ISWS — I/O-space wait-state bit. When ISWS = 1, one wait state will be applied to
all reads from off-chip I/O space. When ISWS = 0, no wait states are generated for
off-chip I/O space. At reset, this bit is set to 1.
Bit 1
DSWS — Data-space wait-state bit. When DSWS = 1, one wait state will be applied
to all reads from off-chip data space. When DSWS = 0, no wait states are generated
for off-chip data space. At reset, this bit is set to 1.
Bit 0
PSWS — Program-space wait-state bit. When PSWS = 1, one wait state will be ap-
plied to all reads from off-chip program space. When PSWS = 0, no wait states are
generated for off-chip program space. At reset, this bit is set to 1.
