37
SETUP OF THE WIRE ROPE SYSTEMS
On-site substructure
Load capacity according to EN 795
B/H - TB SKC Evo
Line wire rope
C/I - Carabiner
min 5 kg
6.3: Flexible mounting according to EN 353-2 on the
on-site substructure:
The load-bearing capacity of the substrate must
comply with EN 795.
The wire rope system may only be installed on
the substrate using approved components from
Table 1.
Vertical use:
The TEUFELBERGER SKC EVO Line is attached to a load-bearing structure (according to EN 795)
with a carabiner according to EN 362. The wire rope system should be weighted with approx. 5 kg at
the lower end to ensure more comfortable climbing. Horizontal use of the TEUFELBERGER SKC EVO
system and loading over an edge is not permitted!
• Max. rated load of the user: 140 kg
• Max. number of users: 1
Figure 7 shows the required static load capacities of the substrates:
Static load-bearing capacity
of the substrate
Number of users
(max. nominal load 140 kg)
16 kN in the direction of the load
1
20 kN in the direction of the load
2
24 kN in the direction of the load
3
Summary of Contents for SKC EVO
Page 51: ...51 NOTES NOTES...
