56 G-TECH/Pro SS/RR Fanatic Manual
Use
ROLLER
to select
Format SD
card
option
Press
SELECT
button to confirm
Use
ROLLER
to select
YES
Press
SELECT
button to confirm
While formatting, progress bar will fill up until formatting
is done.
When formatting is completed, press
SELECT
button to
confirm and return to
Format SD card
menu.
Note:
Do not power-off your G-TECH while formatting is in progress. Doing so will cause SD file system errors. If
formatting gets interrupted for whatever reason, repeat the process.
8.9.2
Reset to factory defaults
In some cases you may want to restore the G-TECH to the condition it was when it was shipped from the factory.
Restoring to factory defaults will clear out all the configuration information and runs stored in internal flash memory. For
RR units, runs and session stored on micro SD card will not be affected.
Note:
Resetting the G-TECH to Factory Defaults resets nearly all the information stored in the G-TECH. Perform this step
only if you are sure that you want to delete all configuration information and SS runs stored in internal memory.
Press
MENU
button to enter
Main Menu
Use
ROLLER
to select
Setup
option
Press
SELECT
button to confirm
