![background image](http://html1.mh-extra.com/html/tesla/g-tech/g-tech_user-manual_1091216033.webp)
33 G-TECH/Pro SS/RR Fanatic Manual
Use
ROLLER
to move the cursor on the graph. As you move the cursor, the current speed and elapsed time indicators are
updated to match the cursor position.
Each tick mark on the horizontal axis marks a 1-second difference. Each tick mark on the vertical axis marks a 10 MPH
difference.
A plus sign (+) marks a 10 MPH change. Whenever you move the cursor past a plus sign, the numbers on the bottom of
the graph are updated to reflect the time to get to that speed from 0 MPH.
Note:
The speed milestone indicator does not change until the cursor rolls over a different 10 MPH marker.
Note:
See “
Error! Reference source not found.
” on page
Error! Bookmark not defined.
for detailed information on
using this graph
7.2.2
Real-time replay
Real-time replay provides you with a graph of speed throughout the run just as the speed graph, but instead 10 MPH
marks on the plot, it has a milestones marks. In order to give you the feel and excitement of the run, the graph is
replayed in real-time. This means that if you did a 15-second run, it will take 15 seconds to draw the replay.
Note:
To finish the replay quickly, rather than in real-time, simply press the
SELECT
button while graph is being drawn.
Once the graph is fully drawn, you will see a graph such the one shown in Figure 22.
Note:
Your graph will look different due to your driving style and vehicle.
Figure 22: Real-time replay
Use
ROLLER
to move cursor along the plot. As cursor moves, the speed value and time stamp value adjust to reflect the
values at the cursor position.
Each tick mark on the horizontal axis represents 1 second. Each tick mark on the vertical axis represents 10 MPH.
You will see a plus sign (+) on the graph at each place where a milestone occurred. When you move the cursor over a
milestone marker, the milestone region will be updated with the name of the milestone and its timestamp.