![background image](http://html1.mh-extra.com/html/tesla/g-tech/g-tech_user-manual_1091216009.webp)
9 G-TECH/Pro SS/RR Fanatic Manual
3
Quick Setup
3.1
Connecting
There are only two cables to connect on the G-TECH unit. The Switch Module is connected to Switch Module Port by
supplied short Ethernet cable. If you want to mount the Switch Module away from G-TECH unit you can use longer
straight-trough Ethernet cable to do that. Power supply is connected trough 12VDC Power Port.
For location of Switch Module Port and 12VDC Power Port, please see the image in section 2.2 on page 7.
3.2
Adjusting Local Time
G-TECH date and time are based on Coordinated Universal Time (UTC) which is extracted from GPS signal. This time code
is closely related to Greenwich Mean Time (GMT) and it has time zones defined the same way as GMT. To obtain correct
date and time you need to adjust difference between UTC and your local time.
To access
Adjust local time
menu, follow the steps below:
Press
MENU
button to enter
Main Menu
Select
Setup
Select
G-Tech Setup
Select
Adjust local
time
Note:
This setup requires that G-TECH has a valid GPS signal in order to extract UTC date and time. If that is not the case,
you will see a screen as shown below: