15 G-TECH/Pro SS/RR Fanatic Manual
4.7
SD card status
This indicator is available only on G-TECH RR Fanatic which uses SD file system for data storage.
Display of SD card icon indicates that card is present and file system is operational.
5
Performing SS Runs
Note:
G-TECH must be in SS mode to perform SS Run. For information on how to change current mode, please see page
13.
There are two types of measurements possible in SS mode, the SS Acceleration Run and HP-TQ Measurement. They
require different driving techniques so please be sure to read and understand following instructions.
5.1
SS Acceleration Run
This section describes how to measure accelerating and braking performance. With G-TECH Fanatic series this type of
measurement can be made either from stop or while car is already running.
Make sure G-TECH is mounted properly, powered on, in
SS mode, GPS has a valid signal, and Main Screen is
displayed
Press
REC
button to activate recording
Accelerate you vehicle briskly and G-TECH will
automatically start recording. Note that E.T. clock will
start running.
Keep driving…
Note:
The G-TECH requires some “oomph” to automatically start recording. If G-TECH doesn’t start timing, launch your
car with more force. G-TECH will reduce the amount of force required if you’re not starting from stop.