7 G-TECH/Pro SS/RR Fanatic Manual
2.2
Back Side
Figure 2: G-TECH back side
•
12Vdc Power Port
– plug in the supplied DC power cable into this connector
•
Expansion Port
– reserved for future use
•
Switch Module Port
– connect Switch Module to this port using supplied Ethernet cable
•
DB9 Port
– no user functions are available trough this port, used in G-TECH production and maintenance only
•
MicroSD FLASH Card Slot
– It uses “push in & push out” action just like a ball-point pen. Pushing it with a paper-
clip works well
•
Square mounting stabilizer
– Insert this stabilizer into the square hole in the mounting clip and snap it.
2.3
Accessories
•
12V cigarette lighter DC Power Cable
– supplies power from vehicle’s accessory (cigarette lighter) plug.
The DC Power Plug has a fuse at the end that plugs into your vehicle. If the cable does not seem to provide
power, the fuse may be blown and need replacing.
To replace the fuse, unscrew the tip and replace the fuse with a standard 1A (one ampere) fuse. Fuses can
normally be purchased at any automotive parts store.
•
Mounting System
– used to hold your G-TECH steady in you vehicle.
For additional details, please refer to “Mounting System” on page 11.
2.4
Icons and Navigation
The G-TECH’s functionality is accessible trough its user-friendly icon interface.
Pressing the
MENU
button on the Main Screen brings up the main menu, as shown below:
