25 G-TECH/Pro SS/RR Fanatic Manual
After setting the gates you will be given the option to
replay last session as shown here. See page 37 for more
details on RR Session review
6.2.3
Driving on prerecorded map with automatic recording enabled
Make sure G-TECH is mounted properly, powered on, in
RR mode, GPS has a valid signal and Main Screen is
displayed. Drive you vehicle to a location where you
recorded a map(s).
When you get into vicinity of map location, G-TECH will
detect that and display a screen as shown here.
Depending on whether you have one ore more maps in
vicinity of your current location, G-TECH will load the map
or inform you that multiple maps were detected.
In case of single map, it will be automatically loaded
within few seconds.
In case of multiple maps, you will have an option to
choose which map to use
If multiple maps were detected, use
ROLLER
to select map
you want to drive.
Use
ROLLER
to select a
map
Press
SELECT
to confirm
your selection
While loading a map, G-TECH will show you this screen
