![background image](http://html1.mh-extra.com/html/tesla/g-tech/g-tech_user-manual_1091216018.webp)
18 G-TECH/Pro SS/RR Fanatic Manual
6
Recording RR Sessions
Note:
G-TECH must be in RR mode to record RR Session. For information on how to change current mode, please see
page 13.
In RR mode you can record your racing session on circular or hill-climb tracks. During the session G-TECH records your
vehicle’s position, speed, acceleration and lap times all in real time as you go.
6.1
RR Session Concepts
6.1.1
Gates
When thinking about gates, first thing you should think of is a START/FINISH line on a circular track. This line is defined by
two points, one on the leftmost side of the track and other on the rightmost side. During the race you are crossing the
START/FINISH line only in one direction. This means that START/FINISH line is orientated is in driving direction.
G-TECH specifies gates the same way. They have a direction and they are defined by two points on a map. Only difference
is that defining points usually lay outside the track, the gate is normally wider than track.
There are also two types of gates. The START/STOP gates are special because they define the start and end of the track.
On circular tracks, this is the same line. On hill-climb track these are two different gates.
Other type of gate is a segment gate, it is used to mark positions on track and divide track into segments. This way you
can measure segment times, cornering times, etc.
The START/STOP gates are defined during map recording and they can not be changed or moved. The segment gates can
be defined during map recording or you can add/remove them later when reviewing the session.
On how to change segment gates after the session, please see page 43.
6.1.2
Map
G-TECH maps are defined by START/STOP gate, optional segment gates and GPS location points representing the race
track shape. Each map has a name and default viewing orientation.
All RR Sessions are driven on maps which can be recorded during the race or reused from some previous session.
6.1.3
Map-Vicinity Automatic Recording
While in RR mode, G-TECH is constantly tracking distances to existing maps. When you approach the location of existing
map G-TECH will detect that situation and load the map in preparation for RR Session recording. If multiple maps are
found in your vicinity you will be asked to select which map you will be driving at.
With Map-Vicinity Automatic Recording you can start RR Session recording without even having to press one button. Just
drive your vehicle to the track, go over the START line and that’s it!
G-TECH will load the map as you approach the track and start recording when you cross the START line.