background image

FOREWORD

i

Congratulations on your selection of this Lexus.  In Lexus vehicles we have invested all our engineering and design resources; all
the know−how we have gained in over 60 years of making automobiles; the highest motivation of our most talented employees; and
our tradition of incessant striving toward ever greater quality.

This Owner’s Manual explains the features of your new Lexus.  Please read it and follow the instructions carefully so that you can
enjoy many years of safe motoring.

When it comes to service, remember that your Lexus dealer knows your vehicle best and is interested in your complete satisfaction.
Your Lexus dealer will provide quality maintenance and any other assistance you may require.

If there is not a Lexus dealer near you, or you need emergency assistance for any reason, please call the following number:

U.S. OWNERS

D

When traveling in the U.S. mainland or Canada:
Lexus Roadside Assistance

1−800−25−LEXUS (Toll−Free)
(1−800−255−3987)

D

HAWAII:
Lexus Customer Service Assistance

1−800−25−LEXUS (Toll−Free) 
(1−800−255−3987)

CANADIAN OWNERS

D

When traveling in Canada or the U.S. mainland:
Lexus Roadside Assistance/Customer Service 1−800−26−LEXUS (Toll−Free) 

(1−800−265−3987)

Please leave this Owner’s Manual in this vehicle at the time of resale.  The next owner will need this information also.

All information and specifications in this manual are current at the time of printing.  However, because of the Lexus policy
of continual product improvement, we reserve the right to make changes at any time without notice.

Please note that this manual applies to all models and explains all equipment, including options.  Therefore, you may find
some explanations for equipment not installed on your vehicle.

Summary of Contents for LX 470


















































































































































































































































































































































































Reviews: